CTY TNHH KT VINH PHÁT


  • Mr. Vương - 0909 63 73 78
  • VINH PHÁT

    Mr. Vương - 0986 63 73 78
Hotline: 0909 63 73 78
Danh mục sản phẩmDanh mục sản phẩm
Đối tác & khách hàngĐối tác & Khách hàng
  • Fuji
  • Autonics
  • schneider
  • ABB
  • khai toan
  • mitsubishi
  • idec
  • TaYa
  • Shimax
  • LS
  • omron
  • cadivi
  • philips
  • paragon
  • siemens
  • panasonic
Sơ đồ đường điSơ đồ đường đi
Đường đi đến công ty
VPE banel
  • MAC10E-MIF-2T MAC10E-MIF-2T - Bo chuyen doi tin hieu Shimax MAC10E-MIF-2T Bộ chuyển đổi tín hiệu Shimax MAC10E-MIF-2T

     Tính năng nổi bật:

    Cài thanh ray

    Thiết kế tiết kiệm không gian: 22.5mm(chiều ngang)

    Độ chính xác cao: +/-(0.3% FS+1 digit)

    Thời gian lấy mẫu: 0.25 giây

    Chức năng nổi bật: Có ngõ ra cảnh báo, ngõ ra tuyến tính,

    Truyền thông RS485 MODBUS, ASCII/RTU

    Thông số kỹ thuật:

    Kích thước: 22.5x94x75x85.9

    Ngõ vào: Thermocouple)K,J,E,T,B,R,S,N,Wre5-26)

    PT100, Voltage(mV)

    Dòng diện tuyến tính(4~20mA, 0~20mA)

    Ngõ ra: Relay

    Điện áp SSR 12V(10~15VDC

    Dòng điện 4~20mA

    Relay cho điều khiển motor

    Nguồn cấp: 100~240V AV 50/60HZ

    Ngõ ra cảnh báo: 1 hoặc 2 ngõ ra cảnh báo

    Phụ kiện có thể lắp thêm: RS485 MODBUS, ASCII/RTU

    Ngõ ra dòng điện tuyến tính(current)4~20mA

    Liên hệ Đặt hàng nhanh
  • MAC10E-IIF-NT MAC10E-IIF-NT - BO CHUYEN DOI TIN HIEU SHIMAX MAC10E-IIF-NT BỘ CHUYỂN ĐỔI TÍN HIỆU SHIMAX MAC10E-IIF-NT

     Tính năng nổi bật:

    Cài thanh ray

    Thiết kế tiết kiệm không gian: 22.5mm(chiều ngang)

    Độ chính xác cao: +/-(0.3% FS+1 digit)

    Thời gian lấy mẫu: 0.25 giây

    Chức năng nổi bật: Có ngõ ra cảnh báo, ngõ ra tuyến tính,

    Truyền thông RS485 MODBUS, ASCII/RTU

    Thông số kỹ thuật:

    Kích thước: 22.5x94x75x85.9

    Ngõ vào: Thermocouple)K,J,E,T,B,R,S,N,Wre5-26)

    PT100, Voltage(mV)

    Dòng diện tuyến tính(4~20mA, 0~20mA)

    Ngõ ra: Relay

    Điện áp SSR 12V(10~15VDC

    Dòng điện 4~20mA

    Relay cho điều khiển motor

    Nguồn cấp: 100~240V AV 50/60HZ

    Ngõ ra cảnh báo: 1 hoặc 2 ngõ ra cảnh báo

    Phụ kiện có thể lắp thêm: RS485 MODBUS, ASCII/RTU

    Ngõ ra dòng điện tuyến tính(current)4~20mA

    Liên hệ Đặt hàng nhanh
  • MAC3A-MCF-NN-NNNNN MAC3A-MCF-NN-NNNNN - Dieu khien nhiet do Shimax MAC3A-MCF-NN-NNNNN Điều khiển nhiệt độ Shimax MAC3A-MCF-NN-NNNNN
    Item Code Specifications
    1. Series MAC3A-  96*96mm Digital Controller
    MAC3B-  48*96mm Digital Controller
    2. Input M  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt1100, JPt100 )
     Voltage( 0-10mV, 0-20mV, -10-10mV, 0-50mV, 0-100mV )
    V  Voltage( 0-1V, 0-2V, -1-1V, 1-5V, 0-5V )
    I  Current( 4-20mA, 0-20mA ) Receiving impedance : 250Ω
    3. Control output C  Contact 1a  240V  AC 2A
    S  Voltage pulse  12V+1~-1.5V  20mA  DC
    I  Current 4-20mA DC Load resistance : 500Ω max
    4. Power supply F-  100-240V ±10%AC
    L-  24V±10%AC/DC
    5. Event output N  Without
    E  Event output 1,2(2points ) 1a 240V  AC  2A
    6. Control output 2 N-  Without
    C-  Contact 1a 240V AC 2A
    S-  Voltage pulse 12V+1~-1.5V 20mA DC
    I-  Current 4-20mA DC Load resistance 500Ω max
        Event output E-  Event output 3 (1point ) Contact 1a  240V AC 2A
        DI D-  DI4(1point ) 5V  DC 0.5mA
    7. DI N  Without
        CT input D  DI1,2,3( 3points ) 5V  DC 0.5mA
    8. CT input N  Without
    H  CT input ( 2points )
    9. Analog output N  Without  
    T  Current 4-20mA  DC
    10. Communication N  Without
    R  RS485
    11. Program N  M
    P  40 Step max

     

     Tài Liệu

     

     

    Liên hệ Đặt hàng nhanh
  • MAC5D-MIF-ED MAC5D-MIF-ED - Dieu khien nhiet do Shimax MAC5D-MIF-ED Điều khiển nhiệt độ Shimax MAC5D-MIF-ED

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MIF-EE MAC5D-MIF-EE - Dieu khien nhiet do Shimax MAC5D-MIF-EE Điều khiển nhiệt độ Shimax MAC5D-MIF-EE

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MIF-ES MAC5D-MIF-ES - Dieu khien nhiet do Shimax MAC5D-MIF-ES Điều khiển nhiệt độ Shimax MAC5D-MIF-ES

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MIF-EC MAC5D-MIF-EC - Dieu khien nhiet do Shimax MAC5D-MIF-EC Điều khiển nhiệt độ Shimax MAC5D-MIF-EC

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MIF-EN MAC5D-MIF-EN - Dieu khien nhiet do Shimax MAC5D-MIF-EN Điều khiển nhiệt độ Shimax MAC5D-MIF-EN

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MSF-ED MAC5D-MSF-ED - Dieu khien nhiet do Shimax MAC5D-MSF-ED Điều khiển nhiệt độ Shimax MAC5D-MSF-ED

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MSF-EE MAC5D-MSF-EE - Dieu khien nhiet do Shimax MAC5D-MSF-EE Điều khiển nhiệt độ Shimax MAC5D-MSF-EE

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MSF-ES MAC5D-MSF-ES - Dieu khien nhiet do Shimax MAC5D-MSF-ES Điều khiển nhiệt độ Shimax MAC5D-MSF-ES

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MSF-EC MAC5D-MSF-EC - Dieu khien nhiet do Shimax MAC5D-MSF-EC Điều khiển nhiệt độ Shimax MAC5D-MSF-EC

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MSF-EN MAC5D-MSF-EN - Dieu khien nhiet do Shimax MAC5D-MSF-EN Điều khiển nhiệt độ Shimax MAC5D-MSF-EN

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MCF-ED MAC5D-MCF-ED - Dieu khien nhiet do Shimax MAC5D-MCF-ED Điều khiển nhiệt độ Shimax MAC5D-MCF-ED

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MCF-EE MAC5D-MCF-EE - Dieu khien nhiet do Shimax MAC5D-MCF-EE Điều khiển nhiệt độ Shimax MAC5D-MCF-EE

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MCF-ES MAC5D-MCF-ES - Dieu khien nhiet do Shimax MAC5D-MCF-ES Điều khiển nhiệt độ Shimax MAC5D-MCF-ES

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MCF-EC MAC5D-MCF-EC - Dieu khien nhiet do Shimax MAC5D-MCF-EC Điều khiển nhiệt độ Shimax MAC5D-MCF-EC

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5D-MCF-EN MAC5D-MCF-EN - Dieu khien nhiet do Shimax MAC5D-MCF-EN Điều khiển nhiệt độ Shimax MAC5D-MCF-EN

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MIF-ED MAC5C-MIF-ED - Dieu khien nhiet do Shimax MAC5C-MIF-ED Điều khiển nhiệt độ Shimax MAC5C-MIF-ED

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MIF-EE MAC5C-MIF-EE - Dieu khien nhiet do Shimax MAC5C-MIF-EE Điều khiển nhiệt độ Shimax MAC5C-MIF-EE

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MIF-ES MAC5C-MIF-ES - Dieu khien nhiet do Shimax MAC5C-MIF-ES Điều khiển nhiệt độ Shimax MAC5C-MIF-ES

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MIF-EC MAC5C-MIF-EC - Dieu khien nhiet do Shimax MAC5C-MIF-EC Điều khiển nhiệt độ Shimax MAC5C-MIF-EC

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MIF-EN MAC5C-MIF-EN - Dieu khien nhiet do Shimax MAC5C-MIF-EN Điều khiển nhiệt độ Shimax MAC5C-MIF-EN

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MSF-ED MAC5C-MSF-ED - Dieu khien nhiet do Shimax MAC5C-MSF-ED Điều khiển nhiệt độ Shimax MAC5C-MSF-ED

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
  • MAC5C-MSF-EE MAC5C-MSF-EE - Dieu khien nhiet do Shimax MAC5C-MSF-EE Điều khiển nhiệt độ Shimax MAC5C-MSF-EE

     

    Item Code Specifications
    1. Series MAC5A-  96 x 96mm Digital Controller
    MAC5B-  48 x 96mm Digital Controller
    MAC5C-  72 x 72mm Digital Controller
    MAC5D-  48 x 48mm Digital Controller
    2. Input  Thermocouple ( K, J, T, E, R, S, U, N, B, PLII, WRe5-26 )
     R.T.D.( Pt100, JPt100)
     Voltage( 0~10mV, 0~20mV, -10~10mV, 0~50mV, 0~100mV )
    3. Control output  Contact  1a 240V AC 2A
    S  Voltage pulse 12V + 1~11.5V 20mA DC
    I  Current 4~20mA DC Load resistance 500Ωmax
    4.Power supply F-  100~240V±10%AC
    5. Event output Event output1, 2 ( 2points ) 1a 240V AC 2A
       Without 
    6.Control output 2  Contact 1a 240V AC 2A
     Voltage pulse 12V + 1~ -1.5V 20mA DC ☆1
        Event output  Event output 3(1 point )Contact 1a 240V AC 2A
        DI  DI( 1 point ) 5V DC 0.5mA ☆1
    ☆1 : It can not be installed with Output1 Voltage pulse "S" or Current "I"

     

     Tài Liệu

    Liên hệ Đặt hàng nhanh
© 2025 CTY TNHH KT VINH PHÁT. All Rights Reserved
Developed by HTS VIET NAM