Trở về | Lên trên
Simatic Siemens S7-400 6ES7407-0KA02-0AA0
Type: PS 407 Power supply
Wide range 10A / 120/230VUC
10A / 5VDC
Product version: 04
Firmware version: V3.0.0
Product discontinuation
Simatic Siemens S7-400 6ES7407-0DA00-0AA0
4A / 120/230VAC
4A / 5VDC
Product version: 03
Simatic NET Siemens S7-400 6GK7443-5DX02-0XE0
Type: CP 443-5 EXT
Communications Processor
For connection of simatic S7-400
Product version: HW-Stand: 2
Firmware version: V3.3
Simatic Siemens S7-400 6ES7405-0DA01-0AA0
Type: PS 405 Power supply
4A / 24VDC
Product version: 01
Simatic Siemens S7-400 6GK7443-1EX11-0XE0
Type: CP 443-1
Simatic Siemens S7-400 6ES7431-7KF00-6AA0
Front connector for module 6ES7431-7KF00-0AB0
With temperature reference
With screw contact
20 Pin alredy contained in the scope of supply of the module
Simatic Siemens S7-400 6ES7492-1BL00-0AA0
Front connector for signal module
With spring contact
48-pole
Simatic Siemens S7-400 6ES7490-1AA00-0AA0
Type: CR and ER
Spare part module location cover for subracks UR
10 pieces per packaging unit
Simatic Siemens S7-400 6ES7401-1DA01-0AA0
Type: CR3 rack
Centralized with 4 slots
Product version: 02
Simatic Siemens S7-400 6ES7405-0KA00-0AA0
10A / 24VDC
Product version: A2
Simatic Siemens S7-400 6ES7492-1AL00-0AA0
Front connector for module signal modules
With screw-type contact
48 pole
Siplus Siemens S7-400H 6ES7400-2JA00-0AA0
Siplus S7-400 Rack UR2-H ALU
Centralized and distributed with 2x9 slots
Simatic Siemens S7-400 6ES7963-1AA00-0AA0
Type: IF963-RS232
Interface module W. RS232 if for PTP connection to CP441
Simatic Siemens S7-400 6ES7492-1CL00-0AA0
For Crimp snap-in contact
Simatic Siemens S7-400 6ES7492-1CL00-1AB0
For crimp snap-in contact
48-pole, 84 pieces per packaging unit
Simatic Siemens S7-400 6ES7401-2TA00-0AA0
Type: ER1 Expansion rack ALU
With 18 slots
For signal modules only
2 Redundant PS Pluggable
Simatic NET Siemens S7-400 6GK7443-5DX04-0XE0
Communications Processor for connecting Simatic S7-400 to Profibus, DP, S5-Compatible PG/OP and S7 Communication
Product version: HW 2
Firmware version: FW V6.6
Simatic Siemens S7-400 6GK7443-1GX20-0XE0
Type: CP 443-1 ADV
Product version: HW:04
Firmware version: V2.1.12
Simatic Siemens S7-400 6ES7403-1TA00-0AA0
Type: ER1 Expansion rack
Product version: A1
Siplus Siemens S7-400 6AG1400-1JA01-4AA0
Siplus S7-400 BGT UR2
9 slot 2X PS steel
For medial stress with conformal coating based on 6ES7400-1JA01-0AA0
Simatic Siemens S7-400 6GK7443-1EX10-0XE0
Firmware version: V2.7.3